High Quality Color Joint
High Quality Color Joint is the highest-class product manufactured through ideal combination of various functional materials and selected admixtures to achieve high product quality to suit the recent trend and luxurious interior fixtures of building structures.
* Product Weight: 2.5kg and 5kg
- Features
-
Application is simple because it only requires adding of water without having to mix sand and cement.
It produces high-quality joints with even and diverse colors of over 10 varieties. Also, efflorescence or discoloration is not caused.
With outstanding water repellency and detergency, it prevents occurrence of slime, thus maintains clear color tones and enables hygienic management.
As an anti-bacterial and anti-fungal product, it prevents generation of various germs and molds from the very source, thus creates hygienic environment.
With outstanding adhesion and durability, it prevents occurrence of cracks, crevices and falling off from the surface applied.
- Use
-
- Joint application or repairing of high-class interior tiles or marbles
- Joint application of bathroom fixtures (toilet bowl and washing basin, etc.)
- Repairing of cracks and crevices.
- Application Procedures
-
- Remove impurities from and sufficiently moisten the application area.
(Partial crushing to be administered in vacuous areas, joints and cracked parts) - Place the content from 1 bag (5kg) of High Quality Color Joint in an appropriately sized container.
Add approximately 1.4ℓ of water and thoroughly mix for 5 minutes or more. 0.7ℓ for 2.5kg - Press down and evenly apply High Quality Color Joint Remitar so that it is sufficiently filled along the joints.
(Make sure to complete the whole procedures within 30 minutes from the time of application). - Cleanly wipe High Quality Color Joint Remitar from tile surfaces with a sponge or cloth before it is cured in approximately 5 ~ 10 minutes.
- Remove impurities from and sufficiently moisten the application area.
- Caution
-
- It is advised to wear plastic or rubber gloves when handling the product.
- Make sure to maintain even ratio of water content in mixture to achieve satisfactory quality, such as even joint color, etc.
- Mixing in of other substances (cement or sand) rather than water may cause deterioration of quality.
- When handling product in low temperature, there is a possibility of freezing in the areas of application. Make sure the surrounding temperature is 5℃ or higher.
- Remitar mixed with water must be used within 1 hour.
- Store product in a dry indoor place. Once opened, the product must be used immediately.
- Store product away from the reach of children.
|
Application area |
Approximately 18m2 [Tile size: 200X250X6mm, width of joint: 3mm] (based on 5kg) |
|---|---|
|
Solidification time |
Approximately 24 hours (based on temperature of 20℃ and humidity of 60%) |
- Inquiry
- Kum Byeong-Gi 82-2-531-7143 kimbk@hanil.com
