Quick Repair
As a quick-hardening product that produces a sufficient level of strength only two or three hours after construction, it can be used in places requiring emergency repair, such as stairs.
You can safely use Remitar for quick repair since it provides long-term stable strength despite its short hardening time.
* Product Weight: 500g (container type), 1.5Kg, 2.5Kg and 5Kg
- Features
-
It produces sufficient strength within two or three hours after mixing.
It does not require you to mix sand and cement.
You can easily use it by simply adding water.
It has high adhesion and durability and provides high static smoothness on the surface.
- Use
-
- Can be used to repair stairs, walls, floors, masonry, gardening, etc.
- Can be used for any repairs requiring restoration within a few hours.
- Can be used for the surface repair of a cement ground such as concrete, mortar, or block.
- Crack and crevice filling.
- Application Procedures
-
- Remove impurities from the working region and wet it with a sufficient amount of water.
(Perform partial crushing in empty spaces, joint sections, and crack-occurring sections) - Put 1.5kg Remitar for quick repair in a proper-sized container and then mix thoroughly with 270cc water for approximately five minutes.
- Use a towel to finish the working region, and cover it with paper or a vinyl bag if the air is dry or temperature is below 5℃
(perform the work within 20 minutes after mixing with water).
- Remove impurities from the working region and wet it with a sufficient amount of water.
- Caution
-
- You should wear vinyl or rubber gloves when handling Remitar.
- For best performance, mix in specified proportions.
- For best performance, this product is not to be mixed with anything
(i.e. cement, sand, waterproofing solutions, etc.), other than water. - Product must be used at temperatures above 5℃ to ensure that the working region will not freeze in outdoor conditions.
- Remitar mixed with water must be used within 20~30 minutes.
- Store product in a dry indoor area and use directly after unsealing.
- Store product away from the reach of children.
|
Application area |
Approximately 50×approximately 50× 3.6 in thickness |
|---|---|
|
Solidification time |
About 2~3 hours (based on the temperature of 20℃ and the humidity of 60%) |
- Inquiry
- Kum Byeong-Gi 82-2-531-7143 kimbk@hanil.com
