Multi-Purpose Repair
This is a multi-purpose product to be used for various tasks such as crack- or crevice-filling and simple masonry.
With high adhesive properties and durability due to the high molecular polymer and many property agents, Remital for multi-purpose repair may always provide clean and clear construction due to its minute particle structure.
* Product Weight : 500g (container type), 1.5Kg, 2.5Kg and 5Kg
- Features
-
It does not require the mixing of sand and cement.
You can easily use it by simply adding water.
It has high adhesion and durability and provides high static smoothness on the surface.
- Use
-
- Can be used for repairing stairs/walls/floors, masonry, gardening, etc.
- Helps with the surface repair of a cement ground such as concrete, mortar, or block.
- Good for rock and crevice filling
- Application Procedures
-
- Remove impurities from the working region and wet it with a sufficient amount of water.
(Perform partial crushing in empty spaces, joint sections, and crack-occurring sections) - Put 1.5kg of Remitar for multi-purpose repairs in a proper- sized container and then mix it with 270cc of water.
- Use a towel to finish the working region, and cover it with paper or a vinyl bag if the air is dry or the temperature is below 5℃.
- Remove impurities from the working region and wet it with a sufficient amount of water.
- Caution
-
- You should wear vinyl or rubber gloves when handling Remitar.
- For best performance, mix in specified proportions.
- For best performance, this product is not to be mixed with anything
(i.e. cement, sand, waterproofing solutions, etc.), other than water. - Product must be used at temperatures above 5℃ to ensure that the working region will not freeze in outdoor conditions.
- Remitar mixed with water must be used within one hour.
- Store product in a dry indoor area and use directly after unsealing.
- Store product away from the reach of children.
|
Application area |
Approximately 50cm×Approximately 50cm× 3.6mm in thickness |
|---|---|
|
Solidification time |
About 10 hours (based on the temperature of 20℃ and a humidity of 60%) |
- Inquiry
- Kum Byeong-Gi 82-2-531-7143 kimbk@hanil.com
