Tile Repair
This is a product to repair tiles from a bathroom, dining room, etc.
Remitar for tile repair is a product that corrects the defects of existing cement tiles and is known for its great adhesion and Good Durability.
* Product Weight: 500g (container type), 1.5Kg, 2.5Kg and 5Kg
- Features
-
It does not require the mixing of sand and cement.
You can easily use it by simply adding water.
It has high adhesion and durability and provides high static smoothness on the surface.
- Use
-
- Used to level inner walls and repair crevices.
- Can be used to repair a sanitation fixture in a bathroom and tile-attaching in a dining room, bathroom, etc.
- Can be used to repair tiles and tile joint repair.
- Application Procedures
-
- Remove impurities from the working region and wet it with a sufficient amount of water.
(Perform partial crushing in empty spaces, joint sections, and crack-occurring sections) - Put 1.5kg of Remitar for multi-purpose repair in a proper-sized container and then mix it sufficiently with 380cc of water.
* 630cc for 2.5Kg and 1,260cc for 5kg - Allow 4~5mm for irregularities in coating and sufficient beating after tile-attaching.
(Complete the work within 20 minutes after coating) - Repair tile-fixing (repair joints).
- Apply a small amount on tile joints and then after 5-10 minutes wash the tile region thoroughly with a cloth.
- Remove impurities from the working region and wet it with a sufficient amount of water.
- Caution
-
- You should wear vinyl or rubber gloves when handling Remitar.
- For best performance, mix in specified proportions.
- For best performance, this product is not to be mixed with anything
(i.e. cement, sand, waterproofing solutions, etc.), other than water. - Do not allow Remitar for tile repair to touch water before it has hardened.
- You should wear vinyl and rubber gloves when handling Remitar for tile repair.
- Product must be used at temperatures above 5℃ to ensure that the working region will not freeze in outdoor conditions.
- Store product away from the reach of children.
|
Application area |
Approximately 50 x approximately 50 x 6 in thickness |
|---|---|
|
Solidification time |
About 24 hours (based on the temperature of 20℃ and the humidity of 60%) |
- Inquiry
- Kum Byeong-Gi 82-2-531-7143 kimbk@hanil.com
